Mobile Battery Lighting Solutions
In mobile and temporary work environments — such as construction sites, event venues, emergency response operations, and remote field installations — unreliable or unavailable grid power often leads to inadequate lighting, safety hazards, and operational delays, undermining productivity and increasing project costs. Intelux Mobile Battery Lighting Solutions solve these challenges with robust, high-performance battery-powered LED lighting systems engineered for uniform, glare-controlled illumination, rapid deployment, and autonomous operation without dependence on fixed power infrastructure. Designed for site lighting, roadworks, maintenance zones, and mobile workstations, these commercial-grade lighting solutions deliver energy-efficient performance, long-duration battery life, rugged build quality, and flexible mounting options — making them an ideal choice for facility managers, EV fleet planners, lighting consultants, and EPC decision makers focused on safety, reliability, and long-term value in off-grid and dynamic environments.
Construction Details:
The lighting systems are housed in durable powder-coated enclosures, designed to withstand outdoor use and transport. The LED luminaires are mounted on telescopic or collapsible poles integrated into a mobile base—wheeled, skid-mounted, or trailer-mounted depending on the application. Internal wiring and controls are protected against moisture and impact, and the entire unit is designed for single-person setup and takedown.
Benefits:
- Plug-and-play mobile lighting power
- Custom battery backup as per requirement
- Integrated SMPS + inverter solution
- Silent, emission-free operation
- Quick deployment and relocation.
- Rugged & Portable: Compact and lightweight with foldable or telescopic poles, designed for rough terrain.
Parameters | Specifications |
SMPS Parameters | |
System capacity | 12KW (Equipped with 3pcs INT R4875 rectifier) & 1KVA (1pcs of 1KVA Inverter Module) |
Monitoring unit | CSU603A |
Input type | Three-phase five-wire (L1/L2/L3/N/PE) |
Input voltage range | 90 V ~ 300 V |
Frequency | 45Hz~66Hz |
Input power factor | ≥0.99 (30%~100% load) |
AC SPD | 3Pole Class C Surge Protection Device. |
Output voltage | -53.5 VDC (-42 VDC ~ -58 VDC adjustable) |
Output current | 225A |
System efficiency | ≥95% (100% rated load) |
Inverter Parameters | |
AC Voltage | 187-242VAC (Nominal 220Vac) |
Battery voltage | 42~53VDC (Nominal 48Vdc) |
Frequency | 50Hz or 60Hz±2.5Hz |
Rated Voltage | Normal state: consistent with the power supply. Inverter state: 220VAC±3% |
Power | 1000VA (Normal state: consistent with the power supply. Inverter state: |
Frequency | 50Hz or 60Hz±2.5Hz |
Output efficiency | Main power mode, ≥98%. Under the contravariant operation mode, ≥90% |
Switch time between mains and | ≤10ms |
Inverter Output Power Factor | ≥0.85 |
Operation temperature | -10℃~+75℃ |
Storage temperature | -10℃~+85℃ |
Humidity | 10% ~ 90% |
| 0 to 2000 m: 100% output power; 2000m to 3000 m: The power derating percentage is 1% when the altitude increases by 100 m. |
Degree of Protection | IP20 |
Dimension | 5U ×19 inches× 360mm (H × W × D) |
Monitoring interface | FE & USB Interface |
LED lighting Parameters | |
LED Light Power | 350W |
Input put voltage | 240v-60HZ |
Input Current | 1.53A |
Power factor | >0.95 |
IP | 66 |
Operation temperature | -10℃~+55℃ |
Applications:
- Emergency lighting for telecom site restoration
- Construction & road work sites
- Emergency & disaster lighting
- Events & temporary installations
- Industrial yards & remote areas.
- Outdoor events and mobile command centers

